Camera: |
DX30 |
Sensor: |
interline transfer CCD, progressive scan with micro lenses and RGB-filter |
Number of picture elements: |
1300 (H) x 1030 (V) |
Size of picture elements: |
6.7 µm x 6.7 µm |
Sensor format: |
2/3" |
Light-sensitive area: |
8.7 mm x 6.9 mm |
Full well capacity: |
25 000 e- |
Sensitivity: |
0.0017 lux 10 s integration time at 20 dB gain
0.17 lux 100 ms integration time at 20 dB gain
1.7 lux 100 ms integration time at 0 dB gain
measured at 3000 K and 50 % video modulation |
Spectral resolution: |
RGB primary colors peak sensitivity
R = 630 nm
G = 540 nm
B = 470 nm |
A/D-converter: |
12 bit / 16 MHz |
A/D-conversion factor: |
25 e-/increment |
Readout noise: |
20 e- rms |
Signal/noise ratio: |
> 60 dB (measured in a dark image at 100 ms integration time and 0 dB gain) |
Gain control range: |
20 dB |
Integration time range: |
1 s to 10 s (recommended) |
Multiple exposure: |
1 to 15 images |
Frame rate camera: |
max. 10 fps depending on the displayed image size and the used computer |
Horizontal binning: |
2 to 8 |
Vertical binning: |
2 to 8 |
Lens mount: |
C-mount with adjustable focus length |
Dimensions (WxHxL): |
74 x 50 x 187 [mm] |
Weight: |
580 g |
Operating temperature: |
-25° to +70° C |
Humidity: |
10 to 90 %, non condensing |
| |
Interface Card: |
Image memory: |
1400 x 1050 pixels |
Operating temperature: |
+10° to +40° C |
| |
PC requirements: |
Operating system |
Minimum configuration: |
Recommended configuration: |
Windows 95/98 |
Pentium II 233 MHz, 32 MB RAM
VGA High Color 800 x 600 |
Pentium III > 450 MHz, > 64 MB RAM
VGA True Color > 1024 x 768 |
Windows NT 4.0 |
Pentium II 233 MHz, 64 MB RAM
VGA High Color 800 x 600 |
Pentium III > 450 MHz, > 64 MB RAM
VGA True Color > 1024 x 768 |
| |
Standard equipment: |
camera, PCI interface card, interface cable (4 m),
software K-Vision ImageAquire on CD, operating manual |
Order no.: |
961-1237 |
